1C0X2 Apprentice Course Block III Practice Test

These questions are part of the practice quiz. Start practicing

• Which fiber type is suited for long distances with a small core?
• Which document is used to assign and update aircrew certification codes in ARMS?
• Have no fear, who is here?
• Which layer of the OSI model provides end-to-end error detection and flow control?
• Which statement correctly describes Difference?
• Which designation corresponds to Fighter?
• What is Initial Qualification Training?
• Which publications are used for the training phases?
• Training profiles are specific to an aircrew ____.
• How do NAT translations affect private IP addresses?
• What do DNS A and AAAA records map?
• Which report is used by schedulers?
• Distinguish between static and dynamic routing.
• How many days must a member be unavailable to prorate training requirements for one month?
• How would you verify that a router has a static route configured?
• What is the 3rd/4th character of the certification code?
• In ARMS, which tab is used to assign training profiles?
• In IPv6 addressing, which type is routable on the Internet?
• What is a FEF?
• Which office maintains the FEF for active flyers?
• AF level training IDs begin with which pattern?
• Name two common wireless security protocols and identify a vulnerability of one.
• Where are training profiles assigned?
• What is the purpose of a DHCP relay agent?
• Which connector is a common fiber optic connector?
• Who is here according to the material?
• What does the 1st Character of the Certification Codes represent?
• Where is an ACL typically placed?
• 802.1Q VLAN tagging inserts what into Ethernet frames?
• Which statement best defines Mission Ready status?
• Which description best defines Combat Mission Ready status?
• How is the subnet broadcast address determined?
• What does Spanning Tree Protocol (STP) prevent in a switching network?
• Which report is used by schedulers?
• Which symbol indicates the primary function or capability of an aerospace vehicle?
• Which status in phase 2 continuation training is defined as Mission Ready?
• Which statement about RIPv2 updates is true?
• MARs are developed locally by what areas?
• How do public and private IP addresses differ?
• Which symbol identifies modifications to the basic mission symbol?
• What does NAT do in a network?
• What is inter-VLAN routing and why is it necessary?
• What is the primary purpose of a firewall in a network?
• Which phase 1 status is defined as BMT for aircrew?
• What is a task identifier?
• Which option is a valid Mission Category?
• MQT stands for which term?
• What is a task identifier?
• Which of the following is an example of an aircrew certification code?
• Which status is synonymous with Combat Mission Ready?
• What is the Training Profile Assignment Listing (TPAL) used for?
• Air Lift is a mission category.
• Which document would you consult as the primary source for continuation training when developing local MARs?
• Which of the following is NOT a common fiber optic connector type?
• Which of the following is NOT listed as a mission category?
• Who is not required to have an FEB?
• What form is the primary source document for recording additional (ground) training events?
• What is Requalification?
• Who is responsible for establishing specific criteria for developing local MARs?
• What is the purpose of sticky MAC on switches?
• BAQ stands for which term?
• Name the three elements of aircraft designation.
• Certification codes are found in AFI 11- _____ Table A2.3.
• What is the function of ARP in IPv4 networks?
• Describe the DORA process in DHCP.
• Which of the following is NOT a QT Phase 1 status?
• What does VLAN tagging on trunk links enable?
• What form records additional ground training events?
• Which assignment areas develop MARs locally?
• What is MTU and why does it matter?
• The training program code consist of how many characters?
• Which configuration is typically more secure for WPA2?
• If a device sends a frame larger than the path MTU, what may occur?
• Which statement describes CAT6 relative to CAT5e?
• What is the 1st character of the certification code?
• The right of the FEF consists of which AF Form?
• What is the difference between link-local IPv6 addresses and global unicast addresses?
• What is the primary purpose of placing a firewall between trusted and untrusted networks?
• What is the 2nd character of the certification code?
• Which statement about STP is correct?
• Which of the following is NOT a private IPv4 address range?
• What form is used to record the results of ground examination, flight checks, and member's qualification as demonstrated during an evaluation?
• Which statement best defines a training profile?
• Which document is used to assign aircraft assignment?
• Which statement best describes a Stateful firewall?
• Which statement best describes the difference between 'Conversion' and 'Difference' in QT terminology?
• Which office handles FEFs for active flyers?
• Prorating training due to unavailability means?
• Which is a mission category that involves airspace surveillance and control from the air?
• Name the Air Crew Training phases.
• Which symbol indicates a nonstandard use of an aerospace vehicle, such as test, experimental, or prototype?
• Which statement correctly describes Conversion?
• AF Form 4324 is primarily used to document what action?
• What does the ITR list?
• What is Basic Aircraft Qualification (BAQ)?
• What code identifies member's flight duty status?
• Which protocol resolves IP addresses to MAC addresses on the local network?
• What is the primary purpose of a training program code?
• What does the Individual Training Report (ITR) list?
• What do the 3rd/4th characters of the Certification Codes represent?
• What does QoS stand for, and what is its purpose?
• IPsec is typically used for?
• Which DHCP message is sent by the client after receiving an Offer to confirm configuration parameters?
• What window would you use if you needed to assign a Task ID to a profile?
• In ARMS, which window is used to assign an aircraft to a crew member?
• What does the design number identify?
• What does the ARP cache store?
• MARs/TARs are defined as what?
• MR stands for which term?
• Which element is NOT part of the aircraft designation?
• Which statement describes when ARP cache entries become invalid?
• Assigning an aircraft to a member in ARMS requires which source document?
• Which form records additional ground training events?
• Which option best identifies a training program code for a specific aircraft?
• What is the role of switch port security?
• What is SNMP used for?
• Which is a common diagnostic command to troubleshoot IPv4 connectivity?
• What is a Link Aggregation Group (LAG) and why is it used?
• What is the purpose of a network baseline and why is it important for troubleshooting?
• What type of training is never prorated?
• What source document is used to assign profile and prorate training requirements?
• The Training Profile Assignment Tab is used for what purpose?
• Aerial Reconnaissance is a mission category.
• What is SLAAC in IPv6 used for?
• How are ACL rules typically evaluated?
• Air Force level task IDs are characterized by what feature, and where can they be found?
• What is the purpose of NAT traversal?
• What is the purpose of a VLAN in a switched network?
• What is a DMZ in network security terms?
• What is Mission Qualification Training?
• What contains source documents that provide a history of each aircrew member's flying qualification?
• What office maintains the FEF for inactive flyers?
• What does the ITR list?
• Which status describes an aircrew member who has completed MQT and maintains proficiency in the command's combat mission?
• Which device enables communication between VLANs?
• AF level training task IDs begin with what characters?
• You have 192.168.10.0/24 and need subnets for 14 hosts per subnet. What is the smallest subnet mask, and what are the first and last usable IPs for the first subnet?
• What contains training requirements that are specific to an aircrew member?
• Define prorate.
• Which option correctly describes Basic Aircraft Qualification (BAQ) eligibility?
• Which statement differentiates RIPv2 from RIPv1?
• The left of the FEF consists of which AF Form?
• What is NetFlow used for?
• Which office handles FEFs for inactive flyers?
• Basic Mission Capable (BMC) has a training deadline of within how many days?
• Which of the following lists the four statuses under Continuation Training Phase 2?
• What is Basic Mission Capable (BMC) status?
• Which statement describes WPA2-Enterprise authentication?
• What does the 2nd Character of the Certification Codes represent?
• TLS/SSL is used for what?
• Which status is only authorized to fly with an instructor?
• What is the OSPF cost metric represent?
• What cable and connector is most common for Ethernet to connect a PC to a switch?
• Which of the following is a mission category?
• NetFlow data is used primarily to support which of the following?
• Which publication covers the first and second characters of the aircrew certification code?
• Which combination of offices is responsible for maintaining the FEFs for active and inactive flyers?
• What is the purpose of SNMP traps?
• What is the broadcast address for the 192.168.1.0/24 subnet?
• How many Air Crew Training phases exist?
• Which command would you use to resolve a hostname to an IP address on Windows?
• Which IPv6 address type is used for link-local communications on a single link?
• Which of the following is a main IPv6 address type?
• What is the primary purpose of subnetting in IPv4 networks?
• Which describes VPN usage of site-to-site versus remote access?
• Name three NAT concepts and briefly describe PAT.
• Which aircraft is often referred to as a cargo?
• MARs are developed locally by what assignment areas?
• The MDS designation stands for which?
• Which statement differentiates WPA2-PSK from WPA2-Enterprise?
• Which algorithm does OSPF use to compute routes?
• Give an example of Difference.
• Which IPv4 address ranges are reserved for private networks?
• Which statement about inter-VLAN routing is true?
• Which statement about the Flight Evaluation Folder left and right forms is true?
• What does the series symbol identify?
• Which IPv6 address type is primarily used for local communications within a site and is not routable on the global Internet?
• The MDS designation contains both letters and numbers.
• What does the Individual Training Summary list?
• The AF Form 4324 is used to document aircrew ____?
• Which status is NOT a phase 2 status?
• Which designation belongs to Reconnaissance?
• What is the purpose of traceroute (tracert) in IPv4 troubleshooting?
• Air-to-Air Superiority is a mission category. Which option best describes it?
• Training profiles are specific to an aircrew ____?
• Give an example of Conversion.
• What is the maximum number of characteristics in an MDS?
• ARP spoofing and how can it be mitigated?
• What is a training program code?
• Which report is used by schedulers?
• What are the most common reasons to prorate?
• What is the typical length for a task identifier?